The beauty and strength of metal roofing has made it a popular choice for commercial and industrial buildings. Unfortunately, it also attracts potential damage such as dents and other forms of damage that can cause roof leaks and other types of problems. Metal roofing is susceptible to dents caused by objects such as flying debris or weather. Metal roofing contractors in Nassau County, New York have found this to be the case with some metal roofing installations. A metal roofing contractor in Nassau County, New York can diagnose and repair any roofing problems or cause of damage including this one. This article will address the question “Why is my metal roof so loud?”
What do I have to do to make my metal roofing loud? – If your metal roofing becomes loud due to reasons beyond your control such as hail or wind, you can reduce noise through the use of reflective roofing materials. Your metal roofing contractor in Nassau County, New York can offer advice on the best reflective roofing materials to use and the best place to purchase them. A metal roofing contractor in Nassau County, New York can also repair any roofing problems that originate from debris or hail.
Why is my metal roofing so thick? – Typical metal roofing thicknesses range between four and six inches. The thickness of your roof depends upon the size of your roof (a.k.a. pitch), the type of metal used (i.e., aluminum, steel, etc.)
Can my metal roofing be painted? – Yes, you can paint your metal roofing. However, please note that painting asphalt shingles on your metal roofing is not recommended. Asphalt shingles are porous and can easily absorb liquids and leaks that occur under your metal roofing. If you are not an experienced roofing contractor or do not have access to the type of paints used on asphalt shingles, you may want to avoid painting your metal roofing. If you are experienced and knowledgeable about applying paints, however, painting your metal roofing can create a beautiful, durable finish that will outlast the life of your roof.
Are there differences between single metal roofing with panels? – Metal roofing with panels has been proven to withstand corrosion and hail damage. Single metal roofing consists of one metal panel. Although single panels provide minimal protection from weather, they are susceptible to intense hail, cold temperatures and high winds. Even if the hail or wind damage does not penetrate the surface of your single panel metal roofing, the moisture that can develop after a hail storm can damage the panel.
What is my overall width? – Before purchasing metal roofing panels, make sure that you know your overall width. One reason metal roofing can seem confusing is because it is often suggested that you purchase panels that have an overall width of four feet. However, this is actually not recommended. The width of a metal roofing panel should be equal to three feet for best protection.
Is my roof straight or slanted? – When installing metal roofing, it is important that your roof is straight and in true line. A slanting roof can lead to moisture buildup behind the shingles. Metal roofs with slanted panels can also become damaged by high winds or heavy rain.
Does my home need sealing? – Sealing is generally not required for most metal roofing products. However, some products do add a layer of protection. Most flat roofs do require sealant. For additional information and options, contact a residential roofing contractor. In many states, flat roofing is required for new construction but in some areas, you may choose to install a low sloped roof.